The mountune52 Stage 1 upgrade delivers phenomenal performance for the Mk7.5 Golf R with either manual or DSG transmissions.
Based on over a decade of tuning vehicles to pass OEM sign-off, the mountune52 Stage 1 offers the highest quality calibration, providing improved drivability, response and of course, a substantial increase in both power and torque, all vigorously durability tested to provide peace of mind that reliability is maintained.
Power is increased to 360PS whilst torque is raised to 500Nm, which is enough to drop the 0-60mph sprint to a staggeringly quick 3.7secs (DSG with mountune52 TCU cal).
VW have created a fantastic platform, but it's only truly brought to life once the mountune52 Stage 1 calibration is installed. This is (easily) administered yourself via our mTune handset which, not only offers multiple calibrations, it also boasts enhanced vehicle functionality, can be used to monitor gauges via the OBD port and also includes a performance meter as well.
A return to stock option is included, together with a valet and anti-theft option, too.
The mountune52 Stage 1 is available in two versions to fully exploit both manual and DSG transmissions. The DSG version also includes a fully optimised transmission calibration option (you can select this option below). This is programmed into the TCU (transmission control unit) by the mTune handset, which then allows it to maintain higher torque levels through the revised clutch pressure optimisation. Shifts are faster, giving harder and quicker acceleration through the gears, whatever level of performance your car has.
Whilst not essential, it is recommended to achieve and maintain the quoted power figures under hard use, an aftermarket induction system should be used, like the mountune52 X3, which the Stage 1 calibration has been fully optimised for.
- Power increased to 360PS
- Torque increased to 500Nm
- Supplied as standard with Stage 1 calibration, return to stock, anti-theft and valet options
- Mk7.5 DSG version includes optional mountune52 TCU calibration fully optimised for DSG-equipped vehicles
- Enhanced launch control
- Easy DIY installation
In the box:
- mTune handset complete with four calibrations; Stage 1, Stock, Valet, Anti-theft
- Gauge display (monitor OBD channels in gauge form)
- Performance measurements (0-60, 1/4 mile)
- Datalogger (10 hours max)
- Fault-code reader
- TCU calibration
- Zip-up case with mTune mount, OBD and USB cables
Please Note: Whilst every effort is made to provide calibration support for all known available base variants, due to the number in existence, there may occasionally be a delay in enabling support for your vehicle. Should this be the case, options to provide this support will be made available, or you will be offered a full refund until specific calibration for your vehicle can be provided.